Same-day appointments often available in Seattle(206) 385-0133
Rodent Control Seattle
Seattle & King County
Same-day often available

Rodent Exclusion and Proofing in Seattle

close every way in, from the footing to the ridge

Whole-house sealing from foundation to roofline: vents, siding seams, pipe holes, garage doors and the places where roof rats climb in from trees and ivy.

Call (206) 385-0133Same-day appointments are often available
Same-day often available
Same-day appointments are often available across Seattle
Price before work
Ask the technician for a written quote first
Exclusion first
Ask for sealing, not bait alone
Rats and mice only
Norway rats, roof rats, house mice, deer mice

Overview

Rodent Exclusion and Proofing in Seattle

Exclusion is the part of rodent control that keeps the problem from coming back. It means finding every gap a rat or mouse can use and closing it with something they cannot chew through. Traps and bait deal with the animals already inside. Exclusion deals with the next ones.

A whole-house exclusion job covers two zones. Down low, it is the foundation vents, sill plate, pipe and wire entries, dryer and bath fan vents, the garage door corners and any gap where a porch, addition or deck meets the house. Up high, it is the gable vents, soffit gaps, the roof-to-wall joint, plumbing vent boots, chimney chases and anywhere a tree branch, vine or power line gives a roof rat a path to the house.

Materials matter more than anything else. The CDC recommends steel wool with caulk for small holes and hardware cloth, metal sheeting, lath screen or cement for larger ones. Expanding foam by itself is easy for rats to chew through, so on its own it is a cosmetic fix. Look for galvanized hardware cloth on vents, metal flashing at gaps, door sweeps with a metal or brush edge and properly sized collars around pipes.

When you call, ask whether the provider does the sealing work themselves and what materials they use. Ask for a written list of every opening found, with photos, and which ones were sealed. If something needs a roofer or a carpenter, like a rotted fascia board, the technician should tell you rather than covering it with mesh.

For crawl space specifics, see crawl space exclusion. For what a hole needs to measure before a mouse can use it, read how small a hole mice use.

Step by step

How the visit usually goes

  1. 01

    Start low

    The technician walks the foundation, checking vents, the sill line, every pipe and wire entry, and the garage door.

  2. 02

    Go high

    Next come the gables, soffits, roof-to-wall joints, vent boots and chimney, plus any tree or vine touching the roof.

  3. 03

    Price the list

    You get the list of openings and a price. Ask what is included and whether any repairs need another trade.

  4. 04

    Seal with the right material

    Mesh, metal, mortar and sealant go in based on the size and location of each gap. Foam is only a filler behind metal.

  5. 05

    Trap the inside and recheck

    Traps catch rodents sealed inside. A follow-up confirms catches stop and every patch is still intact.

Why it is harder in Seattle

Seattle houses have gaps at both ends

Seattle has both of the common rats, and they get in at opposite ends of the house. Norway rats come in low through crawl space vents, sill gaps and broken side sewers. Roof rats come in high, often from a branch over the roof, a fence line covered in English ivy or a power line. A house that only gets sealed at one level often keeps its problem.

The building stock adds gaps. A 1910s house in Ballard or Columbia City may have cedar siding with open seams, a brick chimney with a gap where it meets the roof and decades of plumbing and cable work cutting new holes through the rim joist. Newer townhouses have tight siding but long utility chases and garage doors that rarely seal at the corners.

Rain and wind wear things down too. Vent screens rust, door sweeps crack and sealant breaks down faster in a climate that stays damp for months. A yearly check of the outside of the house, especially before fall, catches most new gaps while they are small.

Want a technician to look at it?

Call (206) 385-0133

Rodent Exclusion and Proofing: common questions

Straight answers to what Seattle homeowners ask before they book.

Is exclusion worth it if I only saw one mouse?

Usually. One mouse means there is a way in, and others will find it. Sealing the gaps now is cheaper than trapping and cleaning up after a larger group.

Can I use spray foam?

Only as a filler behind metal or mesh. Rats and mice chew through foam by itself. The CDC lists steel wool with caulk, hardware cloth, metal sheeting and cement as materials for sealing.

Do I need to cut back trees?

It helps a lot with roof rats. Keep branches, ivy and shrubs from touching the roof and walls so rats cannot climb straight onto the house. An arborist can do large trees safely.

Will exclusion trap rats inside my walls?

It can for a short time. That is why traps go in right after sealing and get checked often in the first week.

How long does exclusion last?

Metal and mesh last for years. New gaps appear when a contractor cuts a new hole, siding is replaced or a vent cover breaks. Ask for a recheck after any major work on the house.

Is exclusion included in rat removal?

It should be, but ask. Some quotes cover traps and bait only. Get the sealing work and materials listed in writing.

Rats and mice rarely leave on their own.

A population that found food and shelter in October is usually bigger by February. Call to reach a local rodent technician who can find the way in, close it and clear what is already inside.

Your call connects to an independent local provider. Describe what you are seeing, ask what the visit includes and get the price before any work starts.

Call (206) 385-0133

Same-day appointments are often available across Seattle.